Deep Casing Tools is a trusted supplier to major national and international oil & gas companies. We have developed strong relationships with many key operators, and this combined with our excellent service record has helped us to secure repeat sales with numerous regional IOCs and major NOCs. Our track record and the strength of our relationships are evident in the following case studies.
9-5/8" TurboCaser™ Reams 833 ft in 5 Hours
As part of an ongoing project the 9-5/8" TurboCaser™ was deployed and successfully reamed 833 ft in 5 hours, reaching a final planned target depth of 16, 473 ft, the operators longest achieved target ...
Rubblizer™ Saves 456 Hours Rig Time
Within the Chinese offshore P&A and slot recovery market, the Rubblizer™ tool was run for a 4th time saving the operator 19 days rig time, completing operations in just 4 days.
9-5/8" Rubblizer™ Saves 7 Days Rig Time
As part of a Slot Recovery project for a major Chinese operator, the Deep Casing Tools (DCT) Rubblizer™ was successfully deployed to enable 676ft of 9-5/8” 47lb/ft casing to be recovered.
TurboCaser™: NOC, Middle East
The third of six onshore wells to be batch drilled, the TurboCaser™ was successfully deployed in January 2022 to the Middle East for a national oil company.
TurboCaser™: NOC, Middle East
The second of six onshore wells to be batch drilled, the TurboCaser™ was successfully deployed in January 2022 to the Middle East for a national oil company.
MechLOK™: Major Norwegian North Sea Operator
The MechLOK™ DP Swivel assisted in the deployment of three screen drop-off runs in a horizontal, highly tortuous multi-lateral project.
TurboCaser™: NOC, Middle East
The first of six onshore wells to be batch drilled, the TurboCaser™ was successfully deployed in January 2022 to the Middle East for a national oil company.
TurboRunner™: IOC, North Sea
An International Oil Company (IOC), in the North Sea, required horizontal well completion screens across the reservoir. Deep Casing Tool's 7" TurboRunner™ was deployed to assist running the lower comp...
TurboCaser: UAE Operator
As part of an extended field trial for a United Arab Emirates (UAE) Operator, 9-5/8” turbine powered reamer shoes were deployed to overcome casing running challenges. The 9-5/8” Deep Casing Tool’s Tur...
TurboRunner: Weatherford, TR1P, Malaysia
During a period of low crude oil price, travel restrictions and cost sensitivity, a client sought to leverage rig time savings by combining upper and lower completions into a single-trip.
MechLOK: New Zealand
Our MechLOK was required as part of an Extended Oil Recovery (EOR) programme for an International Operating Company (IOC).
TurboRunner: Shell Sarawak
Shell Sarawak required horizontal well completions as part of the second stage of a development totalling six new wells.